So here’s the last installment, we’ll make use of all the infrastructure we’ve build up to define primality, and associated functions like, a divisor function, totient, and sigma and whatever else I can come up with.

as always this is a literate source, save to Peano3.lhs and make sure you have the previous posts, execute with:

ghci Peano3.lhs

and have fun.

No big preambles this time, Lets go.

module Peano3 where> import Peano2> import Data.List

First, all this stuff will boil down to prime numbers. So lets come up with a way to test if a number is prime or not.

An easy method is to create a seive of all prime numbers, then our isPrime function is just a search on the list, is it the fastest method in the world? Not really, does it work? You bet it does.

> natPrimes :: [Nat] natPrimes = sieve [S(S(Z))..] > sieve :: [Nat] -> [Nat] -> sieve [] = [] > sieve (x:xs) = x : sieve [y | y -> xs, y `mod` x /= 0]

Awesome, we all know about Haskell’s powerful List Comprehensions. Now lets implement that simple linear search on the list.

> isPrime :: Nat -> Bool > isPrime x = isPrime' x natPrimes > where > isPrime' x (p:ps) > | (p | otherwise = (p == x)

EDIT: augustss mentioned that my use of seq was pointless, theoretically, it would be more efficient to use strict evaluation here, but it won’t till I learn how to do that. It’s unfortunate ghc/hugs won’t recognize tail-recursion and make it strict automatically

Cool, all we’re doing here is building up a chain of “does element p_k equal the given number?

Now what? Well, since we’ve defined prime numbers over the naturals, we can do some handy things like create a factorization function. We’ll just use trial division to determine the factors

> factorize :: Nat -> [Nat]> factorize x > -- if the number is prime, we're done. > | isPrime x = [x] > -- if not, then we know we just need to find the first > -- factor, and then recurse on the number `div` the factor > | otherwise = firstFactor > : (factorize (x `div` firstFactor)) > where > divides x y = (y `mod` x) == 0 > firstFactor = head > $ dropWhile (\p -> not (p `divides` x)) natPrimes

Fast? Hell no, it takes quite some time to factorize 210, and I didn’t even bother to wait till it finished 2310, but it does work.

We know we can create a generic “closure” function, which takes a list and a operation on the elements of that list and recursively applies that function till the list is “closed” that is, applying closure again returns the same list. Lets write that quickly.

> closure :: Ord a => (a -> a -> a) -> [a] -> [a] > closure f ls = closure' f ls [] > -- closure' is just a helper function which keeps track of the > -- last list for comparasion against the closed list > closure' :: Ord a => (a -> a -> a) -> [a] -> [a] -> [a] > closure' f ls old > -- if the old list is the same as the new list, return the > -- list > | ls == old = sort ls > | otherwise = closure' f (performClosure f ls) ls > performClosure :: Eq a => (a -> a -> a) -> [a] -> [a] > performClosure _ [] = []> performClosure f (x:xs) = [x] > `union` (map (f x) xs) > `union` (performClosure f xs)

Well, okay- it wasn’t *that* simple. However, using this, we can write the “divisors” function, which returns a set of all numbers which divide a given number. We’re going to use a nifty trick here too, I’ll take a moment to explain it.

Normally, we see closed sets defined with a “mod” function, as in the group of integers mod 10, etc. We can define the closure operation (in Haskell’s lambda notation) as being:

\ x y -> (x + y) `mod` k

for some constant k. However, this really doesn’t work well when trying to come up with a closure operator for divisors. What we need is a function which will dynamicly limit the power to which each factor is raised. Fortunately, a nice mathematician named Euclid came up with a handy algorithm for creating a function just like this, it is called the greatest common divisor, the GCD.

Upon examination, you’ll note that the function:

\ x y -> (x * y) `gcd` k

will force the product to only contain appropriately sized factors, because if the multiplication creates a number with an factor with an exponent greater than that of the same factor in k, then it will simply return the factor to the lower of the two powers.

So now, lets create a divisors function based on that concept and previously defined functions, we need to add 1 to the list because our factorization function won’t return that.

> divisors :: Nat -> [Nat]> divisors k = S(Z) : closure closer (factorize k) > where closer x y = (x*y) `gcd` k

Pretty simple, just one more reason to love Haskell. Lets define sigma, which is the sum of divisors to a power function. That is

> sigma :: Nat -> Nat -> Nat > sigma k p = sum (map (^p) (divisors k))

Hmm, lets do one more big one, how about Totient, that is, the total number of all numbers x less than k that satisfy the property gcd(x,k) == 1

> totient :: Nat -> [Nat] > totient k = length [x | x <- [S(Z)..(k-1)], gcd x k == 1]

List comprehensions are awesome, aren’t they?

Okay, last thing on our list, Integers. So far, we’ve been dealing with Naturals so far, and as such, have not had negative numbers to deal with. What I intend create a “Smart” Datatype which can cleverly increment and decrement without much difficulty. The problem with Integers is that the naive method for creating them, using the standard data types, is that when we try to decrement a positive number (or vice versa) we have to ensure that we just remove one of the increment/decrement symbols. Rather than just add a new one.

Heres the Datatype, you’ll note its similarity to Nat.

data ZZ = Pre ZZ -- decrement an integer | Z -- Zero is an integer | Suc ZZ -- increment an integer

Note that all we really did was relax the “0 is the successor of no number” axiom. Much of mathematics is discovered by this method of removing the restrictions imposed by some axiom, or assuming an axioms converse/inverse, etc. The most popular example is that of Geometry, for many years, Euclidean Geometry was all there was. However, in the 19th century, Janos Bolyai and Nikolai Ivanovich Lobachesevky (the same mathematician of Tom Lehrer’s “Lobachevsky”) independently published papers about Hyperbolic Geometry, which changed the infamous “parallel” postulate of Euclidean Geometry to say that, instead of only one line, that there are two lines which pass through a point P not on a line L that do not intersect L. Riemannian, or Ellipic Geometry, states that instead of two lines, that there are no lines. In fact, you can imagine an infinite number of geometries based on the number of lines that can be parallel to a given line. For more about Euclidean and Non-Euclidean Geometries, wikipedia has some very nice articles, links are at the bottom of the post.

So the real test is to create some smarter constructors than what is provided, then we already have. The first thing, really, is to note that we can, in fact, pattern match on functions, eg

> precInt :: Int -> Int -> Int> precInt (x + 1) = x

works just fine. So lets use that to create two functions, s and p, which are successor and predecessor over the Integers. We’ll start a new module for this, this should be placed in a separate .lhs file called “ZZ.lhs”

> module ZZ(ZZ(Z), s, p) where > data ZZ = P ZZ > | Z > | S ZZ > deriving (Show, Eq, Ord) -- that'll allow us to skip ahead a bit

Notice how we don’t have to deal with s(Z) or p(Z) that happens automagically for us.

> s :: ZZ -> ZZ > -- if we're incrementing a negative number, we can just eliminate a P > s (P x) = x > -- these take care of the normal cases, just like in the Nats > s x = (S x) > p :: ZZ -> ZZ > -- Now we just do p, in a similar way.> p (S x) = x> p x = (P x)

so now we can define addition, which is all we’ll define over the Integers, most of it will be the same or similar to the Naturals, and if you’d like to see it, I encourage you to try it, I’d love to see it working.

Here it is, Addition:

> addZZ :: ZZ -> ZZ -> ZZ > addZZ Z y = y> addZZ x y > | y | x == Z = y > | y == Z = x > | x | x > Z = addZZ (p(x)) (s(y))

Notably, this also defines subtraction, given the capability of negation, anyway. Hopefully you’ve enjoyed seeing the buildup from a simple concept of Z and S(x::Nat) to a powerful arithmetic. I think the next stop on my list is dealing with DFA/NFA and PDA evaluator and eventually a Regex Recognizer DFA automata, ala Thompson’s NFA, then maybe I’ll build a Turing Machine Interpreter. All plans are subject to change randomly for no reason at all, Stay Tuned!

~~Joe

Wikipedia articles about various geometry stuff.

Geometry

Euclidean Geometry

Non-Euclidean Geometry

Elliptic Geometry

Hyperbolic Geometry

EDIT: fixed some indentation errors

Your use of seq’ does absolutely nothing. Using “seq x y” when x is in WHNF is the same as just using y.

your use of small gray font on black is not sadistic enough! Please use 80% black on 100% black background. See if you can make the font any smaller.

Make the suckers work for their peanos!

@augustss

Really? Hmm, is there any good spot to learn how to use seq appropriately? In the long run, it works just as well to leave it lazy, so I’ll probably just change it to that- but I would like to learn how to use seq.

@anon

Sorry if you don’t like the font much, to be honest- I haven’t really had time to mess around with color schemes, the blog is more or less a brain dump for all my crazy projects, if you’d like to submit some better template code for me, I’d be happy to use it.

Anyway, thanks for the comments.

~~Joe

Well, it’s interesting, but I can’t see the whole code; it is cropped by the sidebar, at least in Konqueror and Firefox…